In this episode, Mark melts some HDPE. Bruce smashes some apples. Drew designs a bathroom cabinet. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one New: -Aaron Yelton  Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark published his outfeed table video. Watch here: https://youtu.be/gDpW3hVYE1w?si=epn8SGB71WSi0628 . Bruce makes some ornaments. Pick some up on his website. Drew finishes the vanity and still doesn't get to film the countertop being cut. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one New: -Randall Brown -Mark Herrick -Ashley Goodwill Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark sits out in the rain & lasers an urn. Bruce is done with craft shows & published a video about the live edge serving board. Watch here: https://youtu.be/zj_EVogkjgg?si=H_mRhcHj3vXec5Ke . Drew finished up the vanity. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran-Joe Santos -Trevor -Ryan Talley New: -Seth Williams -Deby Clover -Ryan Talley Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark is itching to go hunting. He's racing to get his new outfeed table built and video done. Bruce publishes a video about making a huge walnut butcher block countertop. Watch it here: https://youtu.be/fmY3PKyH9Fo?si=ovtx95KtYPPRzW8n . Drew's wife has an interesting shopping trip and he publishes his turning video in collaboration with Peter Brown. Watch here: https://youtu.be/51sfnfnsPtg?si=kWrl3NZplSUoAIPM . Plus, a ton more! This episode is sponsored by Oneida Air Systems! They want you to know about their Dust Deputy Low-Pro separator, available now at Lowe's! They are giving 3 of these away to our listeners...enter here: https://bit.ly/4dL5Huy  GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran-Joe Santos -Trevor New: -Joe Santos -Trevor Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark releases an apple-launchingly good video and has quite the weekend. Bruce sees a new critter. Drew gets a visit from Peter Brown of YouTube fame. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran New:-Terry W. -Tree Carcass Tweaking -Evan Dunker Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark released the bow stand video and talks more about his new plasma cutter and welder. Bruce hasn't made a ton recently, but he made some bronchitis. Plus, he got to work in the shop and on the car with his oldest boy. Drew made some pretty good progress on the renovation up north. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran New: Built by Gus Michael CogdillNot that Aaron, the Other One Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark forgets about a mantle. Bruce turns into Barry White. Drew prepares to start on a big remodel project. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran New: Ryan Rob Harrison New: Andy @ Mud Turtle Woodworks Damon Moran Kevin Griffin Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark comes up with a new currency. Bruce is part of a grazing table. Drew fixed his jointer. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -SPONSORED BY ONEIDA AIR SYSTEMS:They will be demoing a Supercell at the Texas Woodworking Festival November 9-10, 2024 and are there to talk at the pre-party as well. So if your listeners are planning to attend and want to see how the system performs to swing by the Oneida Air Booth.  Texas Woodworking Festival: https://shorturl.at/SKexY -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green New: Ryan Rob Harrison Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark makes wooden T-Track. Bruce actually published videos! Go watch them here: https://youtu.be/6nWOx_9kVyA?si=raOIy1Tu6nJxiQNz & https://youtu.be/Lgqw8qP43rM?si=wwgKNklZFUJWNmmF . Drew cross-threaded his jointer blade. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets the cabin ready for winter. Bruce let's his neighbor go shopping for home goods in his office. Drew is just about done with the kitchenette video/project. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark ponders unnecessary walnut t-track. Bruce tries to get a proof approved. Drew hates people. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark explodes a willow tree. Bruce moves a giant laser. Drew talks to a countertop guy. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark comes back to the land of the living. Bruce builds stuff at church. Drew ducks out early. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package now worth $250+! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark messes with V Carve Pro in a cloud. Bruce messes up a picture frame. Drew keeps finding faces...everywhere! Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package worth $170! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green New: Chad Green Ron Brewer Jarrod LiPuma @LLBuilds_Woodworking Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark catches the crud from the trip. Bruce wants an Epilogue laser. Drew dishes out some trivia...and from listeners live at IWF! Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package worth $170! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ This episode is also sponsored by Oneida Air Systems! Check out all of their dust collection systems and even get a free consultation: https://www.oneida-air.com  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It New: Rich from Woodnote Studio Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark quizzes the guys in the latest segment of "We Took A Quiz." Play along and see how many you get right. No cheating! Bruce is dipping his toe into stacked laser cut city maps. Drew published the Little Free Library video. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package worth $170! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark almost has a hernia moving his drill press onto the new stand. Bruce uses a pole trimmer that's battery powered for the first time. Drew finishes the little library and ponders Aztec screaming whistles. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark talks drill press stand with a flare box. Bruce drives to Detroit on a whim. Drew is mostly done with the construction of the Little Free Library. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Drew tells the whole story about getting hacked...Google account...email account...YouTube channel...EVERYTHING! And how he got it back. Plus, he and the guys discuss some things you can do to prevent it from happening to you! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: Wind and Fire Woodwork Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark's cat is gone. Bruce goes to a parade. Drew releases the planter video. Plus, the guys do a new quiz show segment! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: Wind and Fire Woodwork Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark tells about the legend that brought us Couch Van and Yard Bed has been generous again and blessed us with Ghost Stroller. Bruce shows visitors about how he built the tractor shed. Drew gets hassled by little kids about not building a little library fast enough. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets in touch with Skynet. Bruce rejoins the Miter Saw Club. Drew is pushing away on the planters and getting that video done. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark thinks everything is stupid. Bruce puts up some bluebird houses at the land. Drew keeps working away on the planters and is drowning in pocket hole screws. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark starts adding Elite components to his OneFinity. Bruce plants an orchard. Drew landscapes for his neighbor, just because. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark hates bugs. Bruce drills holes in a bourbon barrel. Drew is finishing his drill press video. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark hosts the guys at his place. Bruce recovers from his allergies trying to waterboard him. Drew shoots guns. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: -Paul Avery Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark is done with the table. Bruce made a cat scratcher on the laser. Drew made a barnwood picture frame. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: -Jim Yearsich Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark takes a guess if his brother will take the walnut table or the cherry one. Bruce wrestled some boulders. Drew tries out being on a road crew for a day. And we answer some of your questions. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark starts milling walnut to make the new kitchen table. Bruce is intimidated by plan creation. Drew talks about his shop tour video. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark released his faux marble vanity top video. Bruce wrestles with his mower deck. Drew makes some end grain cutting boards. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark puts the new blind to use. Bruce sands the tip of his finger off. Drew delivers the pulpit. Plus, a ton more! Mics: Lark M1: https://amzn.to/4dcwL6L Lark M2: https://amzn.to/3Uffgu1 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark sets up the deer stand. Bruce puts the finishing touches on upstairs renovation. Drew experiments with a new drill press. Plus, a ton more! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: -Brian Mastel -You Should See What I Just Saw Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets his sweet Jessem router table setup. Bruce finishes the flooring and plants a natural fence. Drew helps with a cabinet door and sees the most amazing model train set ever. Plus, a ton more! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: pFeF Workshop Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets a spindle for his OneFinity. Bruce is laying more laminate flooring and ripping out carpet. Drew is milling walnut for the lecturn. Plus a ton more! Walton Woodwork: https://www.instagram.com/walton_woodwork/ Solafide Designs KC: https://www.etsy.com/shop/SolaFideDesignsKc T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark survives a blizzard. Bruce put up a shiplap wall. Drew helped a friend with a bunch of plywood storage cubbies. Plus a ton more! Jay Bates Video: https://youtu.be/Dvur03ZA3vU?si=sbdmGp9Nnqn_uxKI PTrees Workshop CNC parts: https://tinyurl.com/bde4w9r T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark welds plastic. Bruce learns about SNails (screw nails). Drew's back sucks. Plus a ton more! Plastic Welder: https://amzn.to/49WdXqu ENTER THE ONEIDA GIVEAWAYS: https://www.oneida-air.com/ulrich-giveaway https://www.oneida-air.com/gunflint-designs-giveaway T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark tells all about how he did at the gun show. Bruce makes some sink drop-ins for a travel trailer out of black walnut. Drew is finishing up plans/files for his hexagon trays (Nerd trays). Plus a ton more! ENTER THE ONEIDA GIVEAWAYS: https://www.oneida-air.com/ulrich-giveaway https://www.oneida-air.com/gunflint-designs-giveaway T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark contemplates buying a nibbler. Bruce gets wrecked by his tractor shed. Drew is nearing the end with his hexagon organizers. Plus a ton more! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New:  -Stephen Goggin Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Bruce hauls woven driveway fabric. Mark killed a Makita. Drew tries to translate German. Plus a ton more! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing German Video: https://www.youtube.com/watch?v=IfiBLHDsYGY SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Bruce pours 21 gallons of epoxy. Mark's concealment cabinets are spawning (He's making more versions). Drew has a non-video project. Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Bruce gets the lap siding installed on the tractor shed and paints it. Then, he turns his attention to a maple table build. Mark, is setting his sights on the gun show, prepping things for that show. His concealment cabinets are sure to be a big hit. Drew is pushing hard to get the video and plans done for his Japanese-inspired bench.  Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Bruce gets trusses up on the tractor shed. Mark, put out a video on making that cherry vanity. Check it out here: https://youtu.be/zWYdjtAdQ6I?si=k5skonX-eLlLL6tw . Drew is partnering with Oneida to giveaway 3 Low Pro Dust Deputies...enter here: https://bit.ly/fsgiveaway1 . Plus a ton more! Solafide Designs on Etsy: https://www.etsy.com/shop/SolaFideDesignsK SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -The Mercury Woodworker -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark uses his chickens to find when something is level. Bruce uses an ACTUAL laser level for the first time. Drew outfits his OneFinity with dust collection. Plus a ton more! Solafide Designs on Etsy: https://www.etsy.com/shop/SolaFideDesignsK SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Matt @ Wackey Worx -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: Aaron @ 4T6 Designs Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark discusses the process of pouring an epoxy vanity top that looks like marble. Bruce uses lag bolts as floating shelf hardware. The guys answer a question about drum sanders eating sandpaper. Drew sells his old router lift...and it did NOT go as expected. Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Matt @ Wackey Worx -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets all of the snow from Canada. Also, he makes good progress building the dovetail cherry vanity. Bruce upgrades his dust collector and put out a video about it: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz . Drew is working on a ton of those gaming trays for the local business in all different wood species. Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Matt @ Wackey Worx -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark makes good progress with the bathroom vanity...it's like a huge dovetail. Bruce mixes a ton of concrete and gets the tractor shed posts put in. Drew released his slab headboard video...go check it out: https://youtu.be/nqvLgQhX72o?si=aAbBGUhQKyYzbWNY. Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: -Keith -Wind & Fire Woodwork Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/fFhx8z6Sngs?si=qNHJ7dnwf9ailqwR Drew's most recent video: https://youtu.be/nqvLgQhX72o?si=aAbBGUhQKyYzbWNY Mark's most recent video: https://youtu.be/a701NsPo4ss?si=pSNjXP8BfxGKUj5W We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark receives a computer through a portal. Bruce published the video about the chicken sign (watch here: https://youtu.be/fFhx8z6Sngs?si=3zLdI_uXt4BypJpD ) Drew's slab headboard video is about to be out. Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/fFhx8z6Sngs?si=qNHJ7dnwf9ailqwR Drew's most recent video: https://youtu.be/p4G0HPB2syY?si=mYVgJA4zmUNSd6OI Mark's most recent video: https://youtu.be/ZqnhjSxhg10 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets his kids into some MeatEater trivia. Bruce delivers the chicken sign and gets a fantastic reaction from his neighbors. Drew gets....sick from his son. Plus a ton more! SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/  (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS:-Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/T90cTjs5ba8?si=vql5ROkbZCSs5QZA Drew's most recent video: https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc Mark's most recent video: https://youtu.be/ZqnhjSxhg10 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: [email protected] FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)