Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked about putting  an EVSE on a shared circuit with a Dryer and still be compliant with 625.40 of the 2023 National Electrical Code. Also Paul answers a question about where you can use SE Cable in apartment complexes.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked if adding a service disconnect, included with a transfer switch, and changing a 3 wire set of service conductors to now a 4 wire feeder to the existing inside panel which is now a remote distribution panel (Sub-Panel) considered a service upgrade or change?If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Is GFCI Required for EVSE in Garages, Outdoors, or Anywhere. Let's rant about it on today's mobile podcastBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Calculating the existing service is critical to adding new loads. Taking amp meter readings is only a snap shot in time. Now, following 220.87 is an option and other than an actual load calculation is the only option. So, you need demand data for 1 year. Now, their is an exception for 30 day, 15 minute peak data to be used. So, you take the max demand load provided and multiply it by 125% plus the new loads and it is not to exceed the existing service or feeder rating. In Lexi's case it did so it means that 220.87 was ONLY to be used to determine if the existing service can be used.... Since it can't a NEW load calculation on the entire building is required and you DO NOT use the values given by the utility.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about all the comments on Facebook for a post about HVAC Protection and circuit conductors sizing. The original poster got 100% correct but the following commentors just made me cringe. The fact that some people will openly post comments that are so wrong simply amazes me. In fact, here is link to the original post on facebook - https://www.facebook.com/share/p/8KW62wwtTuJRRuT5/?mibextid=oFDknk If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to handle electrical inspectors and other issues around electrical inspections.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is our Mastering the NEC Course for those not studying for an electrical exam. This is our basic course for anyone wanting advanced knowledge of the National Electrical Code. This course never expires and works great on your mobile device. The course goes into extreme detail about the NEC and is great for those who simply desire to continue learning the NEC for their career advancement. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Understanding the 240-Volt Split-Phase System: A Simple ExplanationElectricity can be a complex subject, but we can make it easier to understand with somesimple analogies and explanations. One common question is how a 240-volt split-phasesystem works. Let's break it down step by step, using a seesaw analogy to make itclear.The Basics of a Split-Phase SystemA split-phase system is often used in homes. It involves two hot wires and a neutralwire, delivering power to houses. Each hot wire carries 120 volts, and together, theyprovide 240 volts to certain appliances.1. Two Hot Wires (L1 and L2):Each wire carries 120 volts of electricity. These wires are 180° out of phase with each other.2. Neutral Wire:This wire is connected to the center of the transformer and serves as a return path for current.The Seesaw AnalogyTo simplify understanding, imagine a seesaw in a playground with two kids on eitherend. The seesaw moves up and down, with one kid going up while the other goes down.This seesaw represents the two 120-volt wires in a split-phase system.Center of the Seesaw (Center Tap)The center pivot of the seesaw is like the neutral point in a split-phase electrical system.It is grounded and divides the transformer's secondary winding into two equal halves.The Two Kids on the SeesawKid 1 (L1): Represents the first hot wire carrying 120 volts.Kid 2 (L2): Represents the second hot wire carrying 120 volts.How They MoveWhen Kid 1 goes up, Kid 2 goes down. This means they move in opposite directions.This movement is always opposite – when one kid is at the top (positive peak),the other is at the bottom (negative peak).Phase Difference and Voltage CalculationIn an AC system, the voltage changes over time following a wave pattern. When twowaves are 180° out of phase, it means that when one wave is at its maximum positivevalue, the other is at its maximum negative value, and vice versa.Visualizing the ConceptImagine the wave patterns for L1 and L2:L1: Starts at zero, goes up to +120 volts, back to zero, down to -120 volts, and returns to zero in one complete cycle.L2: Starts at zero, goes down to -120 volts (when L1 is at +120 volts), back to zero, up to +120 volts (when L1 is at -120 volts), and returns to zero.This means when L1 is at its highest positive voltage (+120 volts), L2 is at its lowestnegative voltage (-120 volts). This opposite behavior continues throughout the cycle,creating a 180° phase difference.Why This Matters1. Balanced Loads:This 180° phase difference helps balance the electrical load and reduce the current inthe neutral wire.2. Combined Voltage:The total voltage across a load connected between L1 and L2 is the sum of the twovoltages, resulting in 240 volts.Simplified SummaryTwo Kids on a Seesaw: Represent the two 120-volt wires.Up and Down Movement: Represents the alternating current going in opposite phases.Height Difference: Represents the voltage difference, which adds up to 240 volts.ConclusionBy understanding the seesaw analogy and the concept of a center-tap transformer, itbecomes clear why the two 120-volt lines are considered 180° out of phase in a split-phase system. This phase difference allows the system to provide a total of 240 volts tocertain appliances, ensuring efficient and balanced electrical power distribution inhomes.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the Certified Master Electrical Code Professional® program and the use of the CMECP® trademark. The CMECP® Program is the next level in electrical code education for Master Electricians who wish to rise above the crowd and soak with the eagles. There is no other certification on the planet for Master Electricians and our CMECP® Program is protected by the USPTO section 8 and 15 approvals. You can find out more about the CMECP® Program at CMECP.org If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about so many topics that it is just better to listen and enjoy. If you submitted a question to PaulAbernathy.com you might want to listen as I probably addressed your question. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about the lack of true understanding of Grounding and Bonding. While the concepts seem simple enough, it seems that every time I read a social media post that has something to do with grounding or bonding it is wrong and misleading. So, today’s podcast is my opinion on the issues with understanding grounding and bonding.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the new website https://necwitness.com and the expert witness services being promoted to the legal industry. With over 38 years of experience in electrical, such as Master Electrician, Electrical Inspector, Electrical Engineer II, Code Expert and Field Rep for NEMA, and Director of Technical Services to Encore Wire, as well as being the founder and educator at Electrical Code Academy, Inc. We bring a wide array of experiences to the table. This episode explains some of the history.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about calculating the grounded (neutral) conductor on a service and for individual service disconnects as it applied to a grouped allowance in 230.40 Ex. 2. We also explain the use of FMC with service conductors and the need for a SSBJ and lastly tips on cheap exam prep study.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Service Bonding QuestionsBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is when to use the nameplate or 5KW for dryer calculations depending on the standard or optional method of calculating the load for a service. We also tackle the issue of the 2-6 disconnect rule in 230.71 in the 2020 National Electrical Code for an inspector in California.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Will the GFCI or OCPD to the GFCI Function on a Ground Fault?Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Facebook has gone CRAZY!Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the relationship of direct and inverse proportion to voltage, current, resistance, and power when using Ohm Law and Power Formulas. Now, I am not the BEST at electrical theory so I will try and break it down into understandable analogies to help hammer the principles home. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Ground Rods and Parking Lot Light Poles...Say WhatBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the use of multiple EGC’s or a single EGC for multiple branch circuits and Disconnect Ratings for Detached Structures or Buildings supplied by a feeder. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to calculate the service or feeder load calculations for a school using the optional method in 220.86 of the 2023 National Electrical Code.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to calculate the primary and secondary amperes for a single phase as we as three-phase transformers. We will also discuss loading a transformer and a basic calculation that how that takes place. As always podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to find the Horsepower in DC, and Single and Three Phase exam questions that are simply trying to find a horsepower value. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform ampere calculations when factors such as Horsepower, Kilowatts, Voltages, Power Factors, and so forth are given in terms of a question on an exam that simply wants to know the ampere values of a specific question. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to perform Series and Parallel Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in combination series and parallel circuits. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is to discuss how to perform Parallel Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in parallel circuits. Now as always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planeBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to perform Series Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in series circuits. Now as always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform Ohm's law calculations. In this episode, we will discuss finding the amps, ohms (resistance), and voltage calculations. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Today, we chat about existing loads and when to do a new calculation on an existing dwelling and more on various topics.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform a calculation for an all-electric restaurant. This is something that has been seen on many electrical exams and is a calculation that is very easy if you know the steps. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how Electrical Vehicle Charging loads are taken into account in load calculation. We will look at the way the 2023 National Electrical Code gives us new direction as well as looking at what the 2020 NEC said and how it would have been applied before the 2023 NEC.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the locations of luminaries in specific locations, such as wet or damp locations and in proximity to bathtubs and showers. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the reidentification of a conductor in a multiconductor cable for use as the grounded conductor as permitted in 200.6(E) Exception 1. There are folks on social media who are spreading false information as to how this rule is to be applied. So, since Paul Abernathy was in the room when this was being discussed on NFPA Code Making Panel 5, here is Paul’s take on the requirement. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the change in the 2023 NEC for receptacles at islands and peninsular locations and you can install optional receptacle outlets if you desire. We also talk about running additional branch circuits to a detached structure and what the NEC permits, and lastly what are some of the calculations to consider for a Master Electricians exam, specifically the Texas Master Electrician Exam. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Why we learn load calculations.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy explains the use of Table 250.66 and how 250.66(A), (B), and (C) are permitted applications and not actually exceptions.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Our Courses and our students success rate is all related to the study habits of students. As we get older the students study habits get weaker and weaker. With life happening all around you the focus starts to lax as students are pulled in so many directions This is why study habits are important and being able to focus on 90 days of proper study is key to successful exam prep for Electricians.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is what determines the building metal water piping system versus the water pipe grounding electrode, we also chat about the need for a grounding electrode system, and lastly, we chat about the CMECP program and more from submissions via PaulAbernathy.com.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul gives an update on the Fast Trax Basic and Enhanced Program and answers a question about GFCI Protection.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

AfciBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Someone sent me a question about my feelings on Tik Tok and why I am still using it.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode is adjustments and corrections on parallel applications, GFCI requirements in the basements, and more from submissions via PaulAbernathy.com. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about bonding water pipe systems at a riser and to the electrode systems.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO and Founder of ECA, Inc. and the father of structured NEC Learning talks about his latest NEC programs called Basic and Enhanced. Better pricing with all the Bells and Whistles. More info at https://fasttraxsystem.comBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is a submitter who wants to know if they upgrade a service and are they required to update the Smoke Alarms as well. Well, we expand on this topic int his episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Greetings Everyone - Sorry for the audio as I am feeling a bit under the weather today but the show must go on. In this episode, I talk about the reasons for the live stream that is taking place on February 8, 2024, about the upcoming changes to the structure of the National Electrical Code. We are talking about it now because NOW is when the structure is being developed so that it is ready to go for the Public Input stage for the 2029 NEC.In the 2026 NEC, which we are working on right now, a structure matrix will be available so that folks understand what is expected for the next cycle, which would be the 2029 NEC. The time to give your input is now while it is being developed.Hope you all can join me for the LIVE STREAM on February 8, 2024 at 8:00 PM CT pm at Youtube.com/c/masterthenecBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Today we talk about motors and nameplatesBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about having multiple services to a building and the issue of grouping the service disconnects and unprotected SE cables running through an attic space.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.